If you are looking to install Stock Firmware on Galaxy S9 and S9+, then you are at the right place. Today we will guide on How to Install Stock Firmware on Samsung Galaxy S9/S9+. We will use the tool officially distributed from Samsung for flashing Stock ROM on Samsung device called ODIN. ODIN is a very popular tool to flash stock firmware on any Samsung device. So in this guide, we will use the same tool to install Stock firmware on Galaxy S9/S9+.

• Rom Flash Tool Mk 808b Plus Custom Rom

Overall: Price: Quality: Appearance: TV Android stick with some problems. By:daniel.sara 2015-11-12 15:33:15; This stick be good, fast, setup is easy (for my HDMI i must found zoom option-be here:) What is bad: XBMC (kodi) be old version. After update from play dont working. I must uninstall it first and then install it to work.

In this, you can flash Stock Firmware on Samsung Galaxy S9/S9+ using ODIN. Download all the pre-required files before trying the below steps.

• This is for Samsung Galaxy S9/S9+ only.
• Your device must have 70% battery.
• You need a Laptop or PC to perform this Action.
• Download the right firmware for Note 8.
• Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t lose your data)
• Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage that you make to your Phone.

DOWNLOAD THE FILES THAT REQUIRED :

1. I liked the Finless ROM used on the MK908 much better than stock. And the stock ROM installed on this one also could be much better. Finless ROM 1.1 for MK808B Plus is based on firmware 109k4 which does not include drivers for the ap6212 WiFi (and bluetooth) chip included on the v3 board, thus WiFi and Bluetooth.
2. Rom Flash Tool Mk 808b Plus Firmware 3,7/5 5316 reviews Download latest Android KitKat 4.4.2 110k4 PC flash firmware for MK 808 B Plus TV Stick from here or from here. To flash firmware on this box via AMLogic USB Burning Tool read this article.

• Download and Install the Samsung Kies Software.
• Download and Install Samsung USB Drivers.
• Download ODIN ZIP file on Desktop or Laptop.

DOWNLOAD FILES

Steps For How To Install Stock Firmware on Samsung Galaxy S9/S9+ using ODIN

1. If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
   • First of all, enable the USB Debugging
   • To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
   • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging
2. Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator
3. Now Reboot your Phone into Download Mode
4. So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
5. Now Connect your Phone to PC using the USB Cables
6. When you connect the USB cable you will see a blue sign in Odin
7. Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button
8. Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
9. Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.

That’s ALL! When you restart your Phone you will have the new stock firmware installed on Galaxy S9/S9+. I hope you learned the procedure on How to Install Stock Firmware on Samsung Galaxy S9/S9+ using ODIN.

SP Tool is an application that allows you flash firmware, custom recovery or features on Android Devices. It is a powerful tool for all Android devices. But you can use this tool when your phone USB driver is installed on your PC.

What is a SP Tool ?

Smartphone Flash Tools is an application to make bridge or connection between your Android phone and PC. And by this connection, you can easily flash Android Stock ROM, Pre-Resources files like custom recovery, configure control and other features.

Features of SP Tool:

1. Flash stock Rom: You can flash ROM, update your Android devices and most important unbrick your android phone by using Smartphone Flash Tools. This tools is only supports Scatter File format and it is easily Run this utility for your computer or laptop.

2. Flash PreResources file: This tools allows to install PreResources files (img) on your Android phone. Preresources files are recovery.img, boot.img, userdata.img and system.img etc.

Must Read: Easy guide to transfer WhatsApp Chat history to New Smartphone

3. Format and Hard reset: By this option you can Format and Hard reset your devices, Load scatter file and connect your device then simply click on format button.

Download latest SP Tool for Windows:

Download latest SP Tool for Linux:

How to Use SP Tool on your PC or Laptop:

Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video) and Enable Developer Mode and USB Debugging on your Phone by this guide. After then switch off your phone.

Step 2: Extract Stock ROM and SP Flash Tool folder, where you want to save. Open the Smartphone Flash Tool and run Sptool.exe as Administrator.

Step 3: Click on Scatter-Loading option. SP Flash Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.

Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).

Rom Flash Tool Mk 808b Plus Custom Rom

Step 5: Smartphone Flash Tool auto-detect your phone and process will start. If Sp Flash tool is not recognize or detect your phone then install vcom driver. After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Flash Tool then try to flash via Meta mode flashing process, here is Meta-Mode flashing guide.

Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.

Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video.

Must Read: Top 5 Mobile Apps – Boost speed of Android Smartphone

I hope you like this SP Tool and you can easily install or flash ROM and custom recovery on your Android device. If feel any problem in this guide then please use comment box. Thanks to all.